Convair F-106A 1/24 Scale 6mm Foam RC Park Flyer CNC Cut KIT F6 Designed by John Hoover

I designed the F-106 to be an Outside Park flyer with Indoor skilled pilot Arena capabilities. I have flown
the F-106 in 15 + mph winds and she did surprisingly well. I have always liked the “Delta” shaped wings and have had a lot of fun flying mine. I would suggest the Delta Dart for a modeler that has flown a fair amount and built a few planes before. This is not the best first plane, building wise you could pull it off but flight skill wise you should be an intermediate flyer.  She is pretty fast and rolls very well. You will need a radio that has deltamixing for the Elevons.

Specifications:
Wing Span –19″
Wing Area –180 Sq. In
Weight 6.5to 8 Ounces (Typical prototype 7 oz.)

Typical Equipment used on prototypes:
1806 2300 kV Outrunner
Prop 5 – 6” range (Gem Fan 3 blade 5×4 on prototype)
15-20 amp brushless ESC
3s 450 Mah Lipo
Servos – (2) Any 9 gram 1 – 5 gram for rudder
A small light 4 channels plus receiver is required.

Some unique features are:
- Tough 6mm MAF Foam Construction. Carbon fiber reinforced wing.
- Tab and notch construction, self-aligning quick building.
- 1/32” Plywood nose reinforcement.
- Quick build, I can build one in one hour.
Foam Tac glue was used in the prototypes.

 This item is new in the pack, an un-built kit you need to build,  NO electronics the kit and hardware, laser cut plywood is included with a well detail instruction book.  The instruction book features cool 3d renderings of the model.  The first batch of builders commented they thought we had really nice instructions.

DSC07752 DSC07731 DSC07732 DSC07733 DSC07740 DSC07739 DSC07736 DSC07737 DSC07735 DSC07734